Variable speed circulators with built-in speed controller to save energy with permanent magnet motor technology.
Operating conditions
Water temperature +2°C to +110°C.
Ambient temperature 0-40oC.
Maximum operating pressure 10 bar.
Certification with CE requirements.
Quiet operation < 40 dB.
Minimum suction pressure 0.05 bar at 75°C and 0.28 bar at 90°C.
ISO 228 threaded nozzles: G 1, G 1 ½, G 2.
Motor
Variable speed.
Single-phase 230V (-10%, +6%).
Frequency 50Hz – 60Hz.
IP44 protection.
Insulation class F.
Thermal overload protection.
Manufactured according to EN 60335-1, EN 60335-2-51 standards.
Modes of operation
Automatic position.
Proportional pressure program.
Constant speed program.
Construction materials
Shell : Cast iron GJL 200 EN 1561.
Impeller : Composite materials.
Shaft : Stainless steel.
Seal: EPDM.
| CODE | TYPE PUMP | NOISE (inch) | LENGTH (mm) | POWER (w) | DIMENSION (inch) |
| 870P810000-0 | NCE H 25-40/180 | 1” | 180 | 25 | G 1 1/2 – G 1 |
| 870P810100-0 | NCE H 32-40/180 | 1 1/4” | 180 | 25 | G 2 – G 1 1/4 |
| 870P810200-0 | NCE H 25-60/180 | 1” | 180 | 50 | G 1 1/2 – G 1 |
| 870P810300-0 | NCE H 32-60/180 | 1 1/4” | 180 | 50 | G 2 – G 1 1/4 |
| 870P810400-0 | NCE H 25-80/180 | 1” | 180 | 75 | G 1 1/2 – G 1 |
| 870P810500-0 | NCE H 32-80/180 | 1 1/4” | 180 | 75 | G 2 – G 1 1/4 |
| 870P810600-0 | NCE H 25-100/180 | 1” | 180 | 180 | G 1 1/2 – G 1 |
| 870P810700-0 | NCE H 32-100/180 | 1 1/4” | 180 | 180 | G 2 – G 1 1/4 |
| 870P810800-0 | NCE H 25-120/180 | 1” | 180 | 180 | G 1 1/2 – G 1 |
| 870P810900-0 | NCE H 32-120/180 | 1 1/4” | 180 | 180 | G 2 – G 1 1/4 |
- Manufacturer: CALPEDA
