Variable speed circulators with built-in speed controller to save energy with permanent magnet motor technology.
Operating conditions
Water temperature +2°C to +95°C.
Ambient temperature 0-40oC.
Maximum operating pressure 6 bar.
Certification with CE requirements.
Quiet operation < 43 dB.
Minimum suction pressure 0.3 bar at 50°C and 1.0 bar at 95°C.
ISO 228 threaded nozzles: G 1, G 1 ½, G 2.
Motor
Variable speed.
Single phase 230V.
Frequency 50Hz.
IP44 protection.
Insulation class H.
Thermal overload protection.
Manufactured according to EN 60335-1, EN 60335-2-51 standards.
Modes of operation
Analog curve program.
Fixed curve program.
Manual program.
Construction materials
Shell : Cast iron GJL 200 EN 1561.
Impeller : Composite materials.
Shaft: Ceramic.
Seal: EPDM.
| CODE | TYPE PUMP | NOISE (inch) | LENGTH (mm) | POWER (w) | DIMENSION (inch) |
| 870P119000-0 | NCE EI 15-40/130 | 1/2” | 130 | 22 | BR / G 1 – G 1/2 |
| 870P119100-0 | NCE EI 25-40/130 | 1” | 130 | 22 | G 1 1/2 – G 1 |
| 870P119200-0 | NCE EI 25-40/180 | 1” | 180 | 22 | G 1 1/2 – G 1 |
| 870P119300-0 | NCE EI 32-40/180 | 1 1/4” | 180 | 22 | G 2 – G 1 1/4 |
| 870P120100-0 | NCE EI 15-60/130 | 1/2” | 130 | 42 | BR / G 1 – G 1/2 |
| 870P120110-0 | NCE EI 25-60/130 | 1” | 130 | 42 | G 1 1/2 – G 1 |
| 870P121210-0 | NCE EI 25-60/180 | 1” | 180 | 42 | G 1 1/2 – G 1 |
| 870P120310-0 | NCE EI 32-60/180 | 1 1/4” | 180 | 42 | G 2 – G 1 1/4 |
| 870P121000-0 | NCE EI 15-70/130 | 1/2” | 130 | 56 | BR / G 1 – G 1/2 |
| 870P121100-0 | NCE EI 25-70/130 | 1” | 130 | 56 | G 1 1/2 – G 1 |
| 870P121200-0 | NCE EI 25-70/180 | 1” | 180 | 56 | G 1 1/2 – G 1 |
| 870P121300-0 | NCE EI 32-70/180 | 1 1/4” | 180 | 56 | G 2 – G 1 1/4 |
- Manufacturer: CALPEDA
